Cover Image

The Effect of Water Immersion on the Shear Bond Strength Between Chairside Reline and Denture Base Acrylic Resins

The effect of water immersion on the shear bond strength (SBS) between 1 heatpolymerizing acrylic resin (Lucitone 550-L) and 4 autopolymerizing reline resins (Kooliner-K, New Truliner-N, Tokuso Rebase Fast-T, Ufi Gel Hard-U) was investigated. Specimens relined with resin L were also evaluated.

Main Author:	Andrea Azevedo, DDS;1 Ana Lucia Machado, DDS, MS, PhD;2
Format:	Koleksi Audio Visual
Language:	Bahasa Inggris
Published:	Journal of Prosthodontics, 2007
Subjects:
Online Access:	http://oaipmh-jogjalib.umy.ac.idkatalog.php?opo=lihatDetilKatalog&id=93894

PINJAM

Similar Items

Effect of Disinfectants on the Hardness and Roughness of Reline Acrylic Resins
by: Andrea Azevedo, DDS;1 Ana Lucia Machado, DDS, MS, PhD;2 Carlos Eduardo
Published: (2006)

Surface Roughness of Denture Base Acrylic Resins After Processing and After Polishing
by: Julie C. Berger, DDS, MS;1 Carl F. Driscoll, DMD;2 Elaine Romberg, PhD;3
Published: (2006)

Shear Bond Strengths of Two Composite Core Materials After Using All-in-One and Single-Bottle Dentin Adhesives
by: Deniz Sen, DDS, PhD1 and GÃƒâ€šÃ‚Â¨okhan AkgÃƒâ€šÃ‚Â¨ungÃƒâ€šÃ‚Â¨or, DDS, PhD2
Published: (2005)

Influence of Microwave Polymerization Method and Thickness on Porosity of Acrylic Resin
by: Ana Carolina Pero, DDS, MSc,1 DeÃƒâ€šÃ‚Â´ bora Barros Barbosa, DDS, PhD,2 JulieÃƒâ€¹Ã¢â‚¬Â Marra, D
Published: (2008)

The Effect of Triphenylbismuth on the Radiopacity and Performance Properties of Compression- and Injection-Molded Denture Resins
by: Lisa A. Lang, DDS, MS,1 Patrick A. Mattie, DDS, MS,2 and H. Ralph Rawis, PhD3
Published: (2000)

Effect of Chemical Disinfectants and Repair Materials on the Transverse Strength of Repaired Heat-Polymerized Acrylic Resin
by: Ayman E. Ellakwa, BDS, MSc, PhD;1 and Ali M. El-Sheikh, BDS, MSD,
Published: (2006)

A Practical Method for Chairside Repair of Debonded Porcelain Denture Teeth
by: Mutlu Ãƒâ€šÃ‚Â¨Ozcan, DMD, PhD
Published: (2006)

The Effect of Water Absorption on Acrylic Surface Properties
by: Hugh Devlin, PhD, MSc, BSc, BDS;1,2 and Prashant Kaushik, DMD, MBA, BSc1
Published: (2005)

Fixed Rehabilitation of an ACP PDI Class III Patient
by: Ana Lucia Machado, DDS, MSc, PhD;1 Larry C. Breeding, MSc, DMD;2
Published: (2006)

An Innovative Approach to Chairside Provisional Replacement of an Extracted Anterior Tooth: Use of Fiber-Reinforced Ribbon-Composites and a Natural Tooth
by: Neslihan Eminkahyagil, DDS, MSc, PhD;1 and Selim Erkut, DDS, PhD2
Published: (2006)

The Effect of a New Denture Adhesive on Bite Force Until Denture Dislodgement
by: Mutlu Ãƒâ€šÃ‚Â¨Ozcan, DMD, PhD;1 Jeroen M. van der Sleen, DDS;2 Hemmo KurunmÃƒâ€šÃ‚Â¨aki,
Published: (2005)

Physical Properties of Denture Base Resins Potentially Resistant to Candida Adhesion
by: Gunjan Dhir, BDS, MS;1 David W. Berzins, PhD;2 Virendra B. Dhuru, BDS,
Published: (2007)

Microtensile Bond Strength of Different Components of Core Veneered All-Ceramic Restorations. Part 3: Double Veneer Technique
by: Moustafa N. Aboushelib, DDS, MSc,1,2 Cornelis J. Kleverlaan, PhD,1 & Albert J. Feilzer, PhD, DDS1
Published: (2008)

Comparison of Bond Strength of a Pressed Ceramic Fused to Metal versus Feldspathic Porcelain Fused to Metal
by: Daniel M. Schweitzer, DDS;1 Gary R. Goldstein, DDS;2 John L. Ricci, PhD;3
Published: (2005)

Compliance of Resilient Denture Liners Immersed in Effervescent Denture Cleansers
by: Douglas G. Benting, DDS, MS;1 Igor J. Pesun, DMD, MS;2
Published: (2005)

Using Silicone Impression Material and Acrylic Resin to Fabricate Remount Casts for Removable Partial Dentures
by: Yung-tsung Hsu, DDS, MS1 and John B. Farmer, DMD2
Published: (2005)

Influence of Flask Closure and Flask Cooling Methods on Tooth Movement in Maxillary Dentures
by: Rafael L.X. Consani, DDS, MSc, PhD;1 Saide S. Domitti, DDS, MSc, PhD;2
Published: (2006)

The Effect of Water Immersion on the Shear Bond Strength Between Chairside Reline and Denture Base Acrylic Resins
by: Andrea Azevedo, DDS;1 Ana Lucia Machado, DDS, MS, PhD;2
Published: (2007)

Adhesion Testing of a Denture Base Resin With 5 Casting Alloys
by: Nancy L. Clelland, DMD, MSD,1 Meade C. van Putten, DDS, MS,1
Published: (2000)

Compressive Fracture Resistance of Porcelain Laminates Bonded to Enamel or Dentin with Four Adhesive Systems
by: Morakot Piemjai, DDS, MDSc, PhD;
Published: (2007)

Factors Affecting the Strength of Denture Repairs
by: Rosangela Seiko SeÃƒâ€šÃ‚Â´o, DDS, MSc;1 Karin Hermana Neppelenbroek, DDS, MSc;1
Published: (2007)

A Survey of U.S. Prosthodontists and Dental Schools on the Current Materials and Methods for Final Impressions for Complete Denture Prosthodontics
by: Cynthia S. Petrie, DDS, MS;1 Mary P. Walker, DDS, PhD;2
Published: (2005)

Mechanical Properties of Dual-Cured Resin Luting Agents for Ceramic Restoration
by: Keiichi Yoshida, DDS, PhD; Yukiko Tsuo, DDS; Xiangfeng Meng, DDS; and
Published: (2007)

Effect of Disinfection on the Dimensional Stability of Polyether Impression Materials
by: Handan Yilmaz, DDS, PhD;1 Cemal Aydin, DDS, PhD;1 Basak Gul, DDS;2
Published: (2007)

Effect of Light-Curing Method and Cement Activation Mode on Resin Cement Knoop Hardness
by: Rubens Nisie Tango;1 MÃƒâ€šÃ‚Â´ario Alexandre Coelho Sinhoreti, DDS, MS, PhD;2
Published: (2007)

An In Vitro Investigation of a Comparison of Bond Strengths of Composite to Etched and Air-Abraded Human Enamel Surfaces
by: G.B. Gray, BDS, PhD;1 G.P.D. Carey, BDS;2 and D.C. Jagger, BDS, MSc PhD,
Published: (2006)

Effect of Mixing Methods on Mechanical Properties of Alginate Impression Materials
by: Gary Frey, DDS;1 Huan Lu, DDS, PhD;1 and John Powers, PhD2
Published: (2005)

Effect of Different High-Palladium Metal-Ceramic Alloys on the Color of Opaque Porcelain
by: Minos M. Stavridakis, DDS, MS,1 Efstratios Papazoglou, DDS, MS, PhD,2
Published: (2000)

The Effect of Die Spacer on Retention and Fitting of Complete Cast Crowns
by: Anna Belsuzarri Olivera, DDS, PhD1 and Tetsuo Saito, DDS, DDSc2
Published: (2006)

Moisture Effect on Polyether and Polyvinylsiloxane Dimensional Accuracy and Detail Reproduction
by: Mary P. Walker, DDS, PhD;1 Cynthia S. Petrie, DDS, MS;2
Published: (2005)

Effect of Casting Procedures on Screw Loosening in UCLA-Type Abutments
by: Stefania C. Kano, DDS, MS, PhD;1 Paul Binon, DDS, MSD;2
Published: (2006)

Influence of Additional Acid Etch Treatment on Resin Cement Dentin Infiltration
by: Mary P. Walker, MS, DDS,1 Yong Wang, PhD,2 James Swafford, MS,3 Adrian Evans,4
Published: (2000)

Intrapulpal Heat Generation during Provisionalization: Effect of Desensitizer and Matrix Type
by: Tolga Akova, DDS, PhD, Ahmet Ozkomur, DDS, Cengiz Dundar, DDS & Neslin Aytutuldu, DDS
Published: (2008)

Subjective Assessment by Patients of the Efficiency of Two Denture Adhesive Pastes
by: Yasemin Kulak, PhD;1 Mutlu Ãƒâ€šÃ‚Â¨Ozcan, PhD, DMD;2 and Ayla Arikan, PhD1
Published: (2005)

A Custom-Fabricated Device for Chairside Organization of Multiple Implant Components
by: Randy Toothaker, DDS,1 Deborah Ashcraft, DMD,2 Ioannis Soultanis, DDS,3 and
Published: (2003)

Diametral Tensile and Compressive Strengths of Several Types of Core Materials
by: Bulem YuÃƒâ€šÃ‚Â¨ zuÃƒâ€šÃ‚Â¨ guÃƒâ€šÃ‚Â¨ lluÃƒâ€šÃ‚Â¨ , DDS, PhD,1 YalcÃƒâ€šÃ‚Â¸ Ãƒâ€žÃ‚Â±n CÃƒâ€šÃ
Published: (2008)

The Effect of a Denture Adhesive on the Colonization of Candida Species In Vivo
by: Eunghwan Kim, DDS, MS,1 Carl F. Driscoll, DMD,2 and
Published: (2003)

Effect of Denture Cleansers, Surface Finish, and Temperature on Molloplast B Resilient Liner Color, Hardness, and Texture
by: Patchanee Rungruanganunt, DDS,1 and Carl J. Andres, DDS, MSD2
Published: (2000)

Effect of Surface-Charged Poly(methyl Methacrylate) on the Adhesion of Candida Albicans
by: Sang E. Park, DDS, MMSc,1 Antony Raj Periathamby, PhD,2 and
Published: (2003)

Fracture Resistance of Fiber-Reinforced PMMA Interim Fixed Partial Dentures
by: Tamer A. Hamza, BDS, MS, PhD;1 Stephen F. Rosenstiel, BDS, MSD;2 Mohamed
Published: (2006)

Cannot write session to /tmp/vufind_sessions/sess_2h2vqivae9apgh17g5vr88ohs6